DGN1000v3 Firmware Version 1.0.0.22

Bug Fixes

• Fixed SOAP security issue
• Fixed the SSL POODLE vulnerability issue
• Modified the WANIPConnection::GetInfo SOAP API to return the default MAC address even on PPPoA
• Corrected the parental control for PPPoA connection type
• Fixed the issue where NETGEAR Genie show “The operation timed out” issue
• Fixed the issue where router blocks the inbound traffic from WAN when it’s set as pure router mode (NAT disabled)
• Corrected the debuginfo page error when connection type is PPPoA

Known Issues

• The Windows/MAC Genie application will scan devices (by sending ARP packets) and update the network map automatically. It will cause some wireless devices show as wired connection type for a while (until the application update the network map from the router).
• Sometimes the attached devices feature cannot get some wireless devices. (It caused by ARP packet loss).

To Upgrade

1. Note: To avoid wireless disconnect issue during the firmware download process, NETGEAR recommends that firmware upgrade be performed on a computer with wired connection.

2. Download and extract the new firmware to a convenient place such as your desktop. The filename after extracting is DGN1000v3-V1.0.0.22_0.0.22.img
3. Using a web browser, login to the router as admin.
4. Under Maintenance click Router Upgrade.
5. Click Browse and locate the upgrade file DGN1000v3-V1.0.0.14_0.0.14.img.
6. Click Upload.
7. Wait for the upgrade progress bar to complete and final prompt to appear.

If problems occur after upgrading, try clearing the configuration by pressing the Factory Defaults push button on the rear panel until the Test LED blinks (about 5 seconds). Then reenter your configuration information manually
.

This product includes software code developed by third parties, including software code subject to the GNU General Public License ("GPL") or GNU Lesser General Public License ("LGPL"). As applicable, the terms of the GPL and LGPL, and information on obtaining access to the GPL Code and LGPL Code used in this product, are available to you at NETGEAR's Open Source Code Web page. The GPL Code and LGPL Code used in this product is distributed WITHOUT ANY WARRANTY and is subject to the copyrights of one or more authors. For details, see the GPL Code and LGPL Code for this product and the terms of the GPL and LGPL.